Rapid fabrication of molecularly imprinted polymer fibers for solid phase microextraction of bisphenol A

doi:10.3724/SP.J.1123.2014.10008

Abstract

Abstract:

The rapid preparation of molecularly imprinted polymer (MIP) fibers was reported using bisphenol A (BPA) as the template molecular, acetonitrile (ACN) as the porogenic solvent, α -methacrylic acid (MAA) as the functional monomer, ethylene dimethacrylate (EDMA) as the crosslinker, and azodiisobutyronitrile (AIBN) as the thermal initiator. It was carried out within a capillary of 530 μm inner diameter (I. D.) by microwave irradiation in 7 min. The resulted BPA-MIP fibers were pushed out from the capillary, eluted in a vial and inserted in the capillary again followed by the application of the solid phase microextraction (SPME) procedure. The extraction performance was investigated in detail by varying the molar ratios between the template and the monomer (BPA/MAA), the concentration of NaCl, the extraction and desorption time, the pH value and the desorption solvents. The selectivity of the prepared MIP and non-molecularly imprinted polymer (NIP) fibers was comparatively evaluated by selecting two structurally-related compounds, phenol (P) and 4-phenylphenol (PP), and non-analogue dicyandiamide (DCD). The established method was successfully applied for the pretreatment and determination of BPA from beverage samples coupled to high performance liquid chromatography (HPLC). Under the optimal conditions, the linear range of BPA was 10-400 μg/L; the detection limit (LOD) was 0.45 μg/L and the recoveries spiked in the mineral water were 88.4%-102.8%. The results demonstrated that the developed method can determine BPA in real samples with some advantages of simple pretreatment, rapid analysis, low limit of detection and low consumption of materials.

Key words: bisphenol A (BPA), high performance liquid chromatography (HPLC), molecularly imprinted polymer fiber, solid phase microextraction (SPME)

CLC Number:

O658

HU Mei, ZHANG Yijun, YANG Jinghua, ZHOU Xiaomao, WEI Zhuqing, DING Xiaoqing, ZHANG Yuping. Rapid fabrication of molecularly imprinted polymer fibers for solid phase microextraction of bisphenol A[J]. Chinese Journal of Chromatography, 2015, 33(2): 123-131.

References

[1] Sieratowicz A, Stange D, Oehlmann U S, et al. Environ Pollut, 2011, 159(10): 2766
[2] Kandaraki E, Chatzigeorgiou A, Livadas S, et al. J Clin Endocrinol Metab, 2011, 96(3): 480
[3] Inoue M, Masuda Y, Okada F, et al. Water Res, 2008, 42(6/7): 1379
[4] Motoyama A, Suzuki A, Shirota O, et al. Rapid Commun Mass Spectrom, 1999, 13(21): 2204
[5] Inoue K, Wada M, Higuchi T, et al. J Chromatogr B, 2002, 773(2): 97
[6] Ballesteros-Gómez A, Rubio S, Pérez-Bendito D. J Chromatogr A, 2009, 1216(3): 449
[7] Sun Y, Lrie M, Kishikawa N, et al. Biomed Chromatogr, 2004, 18(8): 501
[8] Alexiadou D K, Maragou N C, Thomaidis N S, et al. J Sep Sci, 2008, 31(12): 2272
[9] Rezaee M, Yamini Y, Shariati S, et al. J Chromatogr A, 2009, 1216(9): 1511
[10] He J, Lv R H, Zhan H J, et al. Anal Chim Acta, 2010, 674(1): 53
[11] Hu Y L, Li J W, Hu Y F, et al. Talanta, 2010, 82(2): 464
[12] Vicente B S, Villoslada F N, Moreno-Bondi M C. Anal Bioanal Chem, 2004, 380(1): 115
[13] Baggiani C, Baravalle P, Giovannoli C, et al. Anal Bioanal Chem, 2010, 397(2): 815
[14] Zhang J H, Jiang M, Zou L J, et al. Anal Bioanal Chem, 2006, 385(4): 780
[15] Jin Y F, Chen N, Liu R Q, et al. Journal of the Chinese Chemical Society, 2013, 60(8): 1043
[16] Chen J, Bai L Y, Tian M K, et al. Anal Methods, 2014, 6(2) 602
[17] Jin Y F, Chen N, Liu R Q, et al. Chinese Journal of Chromatography, 2013, 31(6): 587
[18] Jin Y F, Zhang Y P, Huang M X, et al. J Sep Sci, 2013, 36(8): 1429
[19] Wang X, Wang L Y, He X W, et al. Talanta, 2009, 78(2): 327
[20] Chen J, Bai L Y, Liu K F, et al. Int J Mol Sci, 2014, 15(1): 574
[21] Syu M J, Deng J H, Nian Y M. Anal Chim Acta, 2004, 504(1): 167
[22] Qu J R, Zhang J J, Gao Y F, et al. Food Chem, 2012, 135(3): 1148
[23] Yan H, Cheng X, Yang G. J Agric Food Chem, 2012, 60(22): 5524